Tuning the pore size and surface area of monodisperse Poly(Methyl Acrylate) beads via parallel seeded polymerization        
AuthorAnn Jasmine Jose, Shuichiro Ogaw, Mark Bradley
Summary:
A library of 36 monodisperse Poly(Methyl Acrylate)(PMA) beads prepared by seeded polymerisation, for potential application in bioseparations and coatings, were synthesized in a high-throughput (HT) manner and analysed with respect to pore size, surface area and morphology. Beads with high porosity were obtained even with a minimum swelling time of 1 h. Both poly(vinyl alcohol) (PVA) and sodium n-dodecyl sulfate (SDS) were used as the surfactants to obtain particles with a high roundness index. The surface areas were essentially controlled by the ratio of the seed particles introduced in the system relative to the monomer, but did little to affect the average pore size.Increasing the swelling time from 1 to 48 h did not make any significant change in the particle morphology. High surface areas (84 m2/g) and pore sizes up to 110 A could be induced by judicious choice of solvent, while increasing concentrations of so called good solvents increased the surface areas.